Meat Paws!
MEAT PAWS is my take on the D*A*M Meathead Deluxe fuzz, with the bias set as an external control (GRIME). Having this as a readily-tweakable control opens the circuit up to all kinds of wild possibilities. It’s a simple circuit that yields thick, aggressive fuzz. The FILTER control is an input cap blend and turning it clockwise will allow for more bass to enter the circuit. This has less drastic an effect on tone than most standard tone controls since it is at the input of the circuit, but more bass allows for more frequencies to be clipped, resulting in a tighter (less bass) or more blown-out (more bass) sound, depending on where you set the filter. Below are some notes to assist in the build process, as well as the list of required components: Minimum enclosure size is 125B. The design of the board is optimized for top-mount audio and DC jacks Potentiometers are 16mm and spacing is 1.5 inch width by 1.5 inch height (38.1mm x 38.1mm) All resistors are ¼ watt package C1, C2, and C6 ar